Membrane Waterproofing

PACKING

APPLICATIONS

FEATURES & BENEFITS

USAGE GUIDE

ESTIMATION

• Terraces in buildings
• Water retaining tanks
• Sunken areas
• Backside of marbles

• Water resistant to 7 bar head
• Excellent bond to substrate
• Economical & easy to use
• Forms tough & flexible film

Mix both the components with 4 KG pure water using slow speed stirrer to uniform mix. Apply using brush in two Coats to get uniform film

20 m² in two coats to form 1mm thickness per 24 kg unit

25 KG

• Long span terraces
• Parking decks
• Cantilever balconies
• Masonry basements

• High elongation 400%
• Crack bridging capacity
• Excellent bond to substrate
• Economical & easy to use

Stir the flex very well before use to get uniform consistency apply two coats by brush

1.5 Kg/m² in two coats to form 1mm thickness

25 KG

• Basements walls & raft
• Water retaining tanks
• Wet areas in buildings
• Inspection pits

• Effective from both sides negative & positive
• Permanent waterproofing
• Deep penetrative till source

Mix with 7 – 8 liters of water to get slurry consistency & apply using brush in 2 – 3 coats. Alternatively apply as dry shake on horizontal surfaces.

2 – 3 kg/m² as coating in two Coats.

• Water proofing against rain water
• Permeable to water vapour
• Protection against weather

• High Tensile Strength
• Tear and Puncture resistant
• High elongation power rot proofing
• Resistance to ageing weathering

Apply one coat of oil based primer torch the membrane and primer seal all the joints

• Terraces in buildings
• Water retaining tanks
• Sunken areas
• Backside of marbles

• Tough & scratch proof
• Seals all pores
• Deep penetrating prime coat
• Prevent leakage & dampness

Apply using brush in two coats in 90^o to each other

4 – 6 m² / Kg

1KG

• RCC Water Tank
• Internal Damp Walls
• Internal Primer
• Toilet and Kitchen lift Pit

• Economical
• Durable
• Reduce water permeability
• Can be applied on both sides of water preassure

Refer Data Sheet